Defaults Side

default page img

Because often the Roof sections and Parapets have similar attributes for the whole roof. For example, a bid might have several sections of roof with concrete deck and brick parapets and all sections will be adhered with the same product.  By setting defaults each section will start with those default options.  There will still be options to change from the defaults, but these Default options are designed to let you bid more efficiently.

1. Deck Type

Select the most common Deck type on the roof you are bidding. The Roof Section page and Parapets page will then default to the deck type you select here.

2. Wall Type

Similarly, Select the most common Wall type on the roof you are bidding. The Parapets page will then default to the deck type you select here.

3. Roof Sections Material

Here you can select the default type of materials that will be bid on the Roof Section page. Notice the options to select the following defaults for the Roof Section Page: Roof System, Design Table, Type (Mil Thickness), Color, and Attached With (Typically mechanical fasteners or adhesives). 

  • Enhancement Options: If you click the blue underlined Enhancement Options, the Advanced Options window will pop-up giving you additional options to set up in the defaults.  It is advised to consult Duro-last Engineering Services (800) 248-0280 when adding these advanced options.
  • Apply to Existing Roof Sections: Take care when using this button, when you click it, all of the roof sections that have already been enter will be changed to the defaults that are currently selected.  An pop-up box like this one will appear when you click Apply to Existing Roof Sections to let you know what all will be affected on the Roof Sections page:

4. Underlayment Attached with:

Similar to the attached with under Roof Section Material, this is where you may select the most common underlayment attachment method for you bid. 

  • Enhancement Options: If you click the blue underlined Enhancement Options, the Advanced Options window will pop-up giving you additional options pertaining to Underlayment attachment to set up as default. 

5. Parapets Material

Similar to Roof Sections Material, here you can select the default type of materials that will be bid on the Parapets page. Notice the options to select the following defaults for the Parapets Page: Roof System, Design Table, Type (Mil Thickness), Attached With (Typically mechanical fasteners or adhesives), and Color. 

  • Apply to Existing Parapets: Take care when using this button, when you click it, all of the Parapets that have already been enter will be changed to the defaults that are currently selected.  There is no pop-up box like when you Apply to Existing Roof Sections, this happens immediately when you click the button.

6. Select Type of Warranty:

This allows you to select from all of the Duro-last Warranties available (at the time of the last update).  The  Max Wind Expected Dropdown will be available if you select one of the Warranties including High Wind.